Compare
madCAM
versions | madCAM
3X
 | madCAM
4X
 | madCAM
5X
|
| 2D Curve Milling | 3X | 4X | 5X |
| Profiling | | | |
| Pocketing | | | |
| Facing | | | |
| Simultaneous 4-axis Profiling | | | |
| Simultaneous 4-axis Pocketing | | | |
| Simultaneous 4-axis Facing | | | |
| 4-axis Drilling | | | |
| Simultaneous 4+1-axis Profiling | | | |
| Simultaneous 4+1-axis Pocketing | | | |
| Simultaneous 4+1-axis Facing | | | |
| 5-axis Drilling | | | |
| Roughing | 3X | 4X | 5X |
| 3D Pocketing | | | |
| 3D Facing | | | |
| Parallel Roughing | | | |
| Stock Model | | | |
| Roughing-remachining | | | |
| Simultaneous 4-axis 3D Pocketing | | | |
| Simultaneous 4-axis 3D Facing | | | |
| Simultaneous 4-axis Parallel Roughing | | | |
| Simultaneous 4-axis Stock Model | | | |
| Simultaneous 4-axis Roughing-remachining | | | |
| Simultaneous 4+1-axis 3D Pocketing | | | |
| Simultaneous 4+1-axis 3D Facing | | | |
| Simultaneous 4+1-axis Parallel Roughing | | | |
| Simultaneous 4+1-axis Stock Model | | | |
| Simultaneous 4+1-axis Roughing-remachining | | | |
| Finishing | 3X | 4X | 5X |
| Z-level finishing (Waterline finishing) | | | |
| Planar finishing * | | | |
| Planar finishing with contouring * | | | |
| Pencil Tracing | | | |
| Simultaneous 4-axis Radial-level finishing | | | |
| Simultaneous 4-axis Planar finishing * | | | |
| Simultaneous 4-axis Planar contouring * | | | |
| Simultaneous 4-axis Pencil Tracing | | | |
| Simultaneous 4+1-axis Radial-level finishing | | | |
| Simultaneous 4+1-axis Planar finishing * | | | |
| Simultaneous 4+1-axis Planar contouring * | | | |
| Simultaneous 4+1-axis Pencil Tracing | | | |
| Remachining | 3X | 4X | 5X |
| Z-level remachining * | | | |
| Planar remachining * | | | |
| Simultaneous 4-axis Radial-level remachining | | | |
| Simultaneous 4-axis Planar remachining | | | |
| Simultaneous 4+1-axis R-level remachining | | | |
| Simultaneous 4+1-axis Planar remachining | | | |
| 3D Curve Milling | 3X | 4X | 5X |
| Along Curves engraving | | | |
| Project curves | | | |
| Between two curves | | | |
| From boundary curves | | | |
| Simultaneous 4-axis Engraving | | | |
| Simultaneous 4-axis Project curves | | | |
| Simultaneous 4-axis Between two curves | | | |
| Simultaneous 4-axis From boundary curves | | | |
| Simultaneous 4+1-axis Engraving | | | |
| Simultaneous 4+1-axis Project curves | | | |
| Simultaneous 4+1-axis Between two curves | | | |
| Simultaneous 4+1-axis From boundary curves | | | |
| Indexed Milling | 3X | 4X | 5X |
| Indexed 3+1-axis machining ** | | | |
| Indexed 3+2-axis machining ** | | | |
| Regions and Boundaries | 3X | 4X | 5X |
| Box work piece | | | |
| Curves | | | |
| Clipping planes | | | |
| User defined stock models | | | |
| Simulation | 3X | 4X | 5X |
| 3-axis Material removal simulation | | | |
| 4 axis machine parts simulation | | | |
| 5-axis machine parts simulation | | | |
| Toolpath editing | 3X | 4X | 5X |
| Edit as ordinary Rhino curves *** | | | |
| Post Processors | 3X | 4X | 5X |
| Customisable post processors | | | |
| 4-axis output | | | |
| 5-axis output | | | |
| 5-axis APT output | | | |
| 3X | 4X | 5X |
